CALL US: 011 917 3556
PRODUCT GALLERY:
(High Wind Load – HWL) for 700 secret fix roof sheet.
Poly sliders are designed specifically for polycarbonate or fibreglass sheeting. With the upper sliding clip positively screwed, in conjunction with a saddle washer to the sheeting, which in turn is clipped on the lower sliding rail, that is screwed on to the purlins along with the main base positioning bracket, to allow for the thermic movement of the sheeting i.e. 5mm/1m.
Poly sliders are designed specifically for polycarbonate or fibreglass sheeting. This clip system is also used on 700 type secret fix steel sheeting, around the parameters, where high wind conditions prevail. These sliding brackets can allow for expansions of up to 80mm.
Poly sliders are designed specifically for polycarbonate or fibreglass sheeting. This clip system is also used on 700 type secret fix steel sheeting, around the parameters, where high wind conditions prevail. These sliding brackets can allow for expansions of up to 80mm.
Two Piece Sliders
The flashing slider is designed to allow for expansion of up to 100 mm of the profiled sheeting whilst preventing shearing of fasteners, distortion and / or tearing of flashings and sheeting. This slider can be applied to the headwall / sidewall, edge and ridge flashings.
The flashing slider is designed to allow for expansion of up to 100 mm of the profiled sheeting whilst preventing shearing of fasteners, distortion and / or tearing of flashings and sheeting. This slider can be applied to the headwall / sidewall, edge and ridge flashings.
The flashing slider is designed to allow for expansion of up to 100 mm of the profiled sheeting whilst preventing shearing of fasteners, distortion and / or tearing of flashings and sheeting. This slider can be applied to the headwall / sidewall, edge and ridge flashings.
Clip on Sliders
The clip on slider clips onto the rib of the profiled sheet in any position without the need for fasteners (therefore no piercing damage to the roof sheeting) and will slide an infinite linear distance without scratching the roof sheeting. Manufactured from: 1.0mm galvanised and 1mm Zincalume steel.
The clip on slider clips onto the rib of the profiled sheet in any position without the need for fasteners (therefore no piercing damage to the roof sheeting) and will slide an infinite linear distance without scratching the roof sheeting. Manufactured from: 1.0mm galvanised and 1mm Zincalume steel.
The clip on slider clips onto the rib of the profiled sheet in any position without the need for fasteners (therefore no piercing damage to the roof sheeting) and will slide an infinite linear distance without scratching the roof sheeting. Manufactured from: 1.0mm galvanised and 1mm Zincalume steel.
Laplocks
LAPLOCK Material: - 1.0 mm Galvanized - 1.0mm Zincalume - 0.8mm colour (chromadec) Size: 150mm - 220 mm To suit: 700 profile Laplocks are used to retain end lap engagement between purlin centres, which often become uncoupled due to vibration.
LAPLOCK Material: - 1.0 mm Galvanized - 1.0mm Zincalume - 0.8mm colour (chromadec) Size: 150mm - 220 mm To suit: 700 profile Laplocks are used to retain end lap engagement between purlin centres, which often become uncoupled due to vibration.
LAPLOCK Material: - 1.0 mm Galvanized - 1.0mm Zincalume - 0.8mm colour (chromadec) Size: 150mm - 220 mm To suit: 700 profile Laplocks are used to retain end lap engagement between purlin centres, which often become uncoupled due to vibration.
F 10 and S 10
Material: 0.8mm sheeting in: - Galvanized - Zincalume F10’s are used to retain the flashing without drilling directly into to roof sheeting. Allows for minimal expansion.
Material: 0.8mm sheeting in: - Galvanized - Zincalume F10’s are used to retain the flashing without drilling directly into to roof sheeting. Allows for minimal expansion.
Material: 0.8mm sheeting in: - Galvanized - Zincalume F10’s are used to retain the flashing without drilling directly into to roof sheeting. Allows for minimal expansion.
EVA Bonded Washers
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting Size: 19 and 26 diameter (outside diameter) 6.5 diameter hole 4.5 diameter hole - (4x19) 9.0 diameter hole - (8x19) and (8x26) Curved washers: Curved to suit corrocated sheeting Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum).
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting Size: 19 and 26 diameter (outside diameter) 6.5 diameter hole 4.5 diameter hole - (4x19) 9.0 diameter hole - (8x19) and (8x26) Curved washers: Curved to suit corrocated sheeting Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum).
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting Size: 19 and 26 diameter (outside diameter) 6.5 diameter hole 4.5 diameter hole - (4x19) 9.0 diameter hole - (8x19) and (8x26) Curved washers: Curved to suit corrocated sheeting Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum).
Profiled Saddle Washers
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Material: 0.8mm Z275 Galvanized sheeting 1.2mm Mill finish Aluminium sheeting 0.8mm 304 Stainless Steel sheeting 0.8mm Zincalume and Chromadek sheeting To suit: Size: 700 profile: Saflock, Kingklip, Kliplok: 48 x 48 mm IBR and Widespan: 50 x 72mm Industrial 7: 48 x 48mm Specifications: Cold bonded to 3mm Ethylene Vinyl Acidate (E.V.A) (closed cell cross linked seal) U.V, Acid and Alkaline resistance Temperature 80deg.c (maximum) Low carbon footprint (Okay for Polycarb)
Secret Fix Roof Sheeting (Rib Cap)
(1/3) RIB CAP - (1 per RIB) Material: 0.6mm Z275 Galvanized sheeting 0.6mm Zincalume and Chromadek sheeting Degrees: 90º 95º 100º 110º 120º 125º 135º 145º 165º 180º
(2/3) These caps can be used in continuous lengths from eave to eave by cutting the ribs and bending the pans at the ridgeline. They are fitted over the cut ribs, which open up when the pans are bent. Fitting the rib caps can be time consuming and care must be taken with sealing, to avoid any possibility of leakage.
(3/3) The ribs must be cut squarely with a metal cutting blade in a power saw, set to the depth of the rib minus 2mm. It is essential to state the included angle, not just the roof pitch, when ordering these caps, as ridge and vertical caps are different angles.
Insulation Spacers
Material: 0.8 - 1.0mm Z275 Galvanized sheeting Are 50 x 50mm on the top, leg lengths vary according to thickness of insulations board. From 10mm - 120mm. Made from Galv material 0.8 to 1.0mm thick with reinforced legs for additional strength and tapered legs for easy penetration of insulation.
Material: 0.8 - 1.0mm Z275 Galvanized sheeting Are 50 x 50mm on the top, leg lengths vary according to thickness of insulations board. From 10mm - 120mm. Made from Galv material 0.8 to 1.0mm thick with reinforced legs for additional strength and tapered legs for easy penetration of insulation.
Material: 0.8 - 1.0mm Z275 Galvanized sheeting Are 50 x 50mm on the top, leg lengths vary according to thickness of insulations board. From 10mm - 120mm. Made from Galv material 0.8 to 1.0mm thick with reinforced legs for additional strength and tapered legs for easy penetration of insulation.
Insulation Spacers
(1/2) These sliders are required when installing polycarb or fibreglass sheeting. They allow for thermic expansion of up to 50mm. In conjuction with an IBR saddle washer. Polycarb thermic expansion = 5.0mm per/m.
(2/2) How to install: - The lower sliding rail is attached to the purlin with a class 3, (12x20mm) Tek screw. - The upper profiled section is then coupled to the rail. - The sheeting is then secured to the upper section in conjunction with a reinforced bonded saddle washer, with a class 3, 12x20mm Tek screw. Additionally a thermo saddle can be used if it is required that polycarb sheeting in conjunction with steel sheeting (next to), for additional light purposes to existing or new structures.
Thermic Saddle Units
To suit: 700 and 410 secrret fix sheeting. When polycarb profiled sheeting in conjuction with steel profiled sheeting (next to) for additonal light purposes is required on existing or new structers with expantion rates of up to 80mm, ie Polcarb expantion = 5mm per 1m
To suit: 700 and 410 secrret fix sheeting. When polycarb profiled sheeting in conjuction with steel profiled sheeting (next to) for additonal light purposes is required on existing or new structers with expantion rates of up to 80mm, ie Polcarb expantion = 5mm per 1m
Universal Secret Fix Roofing Clips
(1/4) To suit: 700 and 410 width roof sheeting. These clips come in full length 700 clip with interlocking holes to maintain a consistent700mm or 410mm pitch thereby preventing "snaking" of roof sheeting. The clips also come in shorter more economical lengths which do not interlock for shorter spans of roof sheeting.
(2/4) These clips can now accommodate hex head fastening screws, when required for hot rolled or cold rolled perlings, without making contact with the roof sheeting therefore eliminating the risk of gouging or indentation of the sheeting. The lap locking upright of the clip has a greater depth of stiffening ribs and a nearer vertical stance to prevent bending when excessive downward pressure is applied to engage the roof sheeting.
(3/4) The central anchor support dimples, which are double thickness of metal also preventing screws pull through, are more deeply drawn allowing the clip far greater stability on any diameter of hot rolled tubular sections.